turning <
> only, without operating function button 2
.
2.
If the camera’s exposure compensation is set to 1/2-stop increments, flash
exposure compensation will be up to ±stops in 1/2-stop increments.
3.
FEB
With FEB (Flash Exposure Bracketing) function, you can take three shots while
automatically changing the flash output. The settable range is up to
±3 stops in 1/3-stop
increments.
1. Press function button 4 until
is displayed.
2. Press function button 3 corresponding to
,
is
displayed and the FEB level display is highlighted.
3. Set the FEB level: turn<
> to set FEB level and press
<
> button.
4.”0.3”indicates 1/3 stops, and”0.7”indicates 2/3 stops.
5. When used together with flash exposure, FEB shooting
is performed based on the flash exposure compensation
amount.
Note:
1
）
You can choose whether or not to cancel FEB automatically after shooting three
shots with FEB by setting C.Fn03.
2
）
You can change the order of FEB sequence by setting C.Fn04.
6.
High-speed Sync
With the high-speed sync function, the flash can synchronize with all shutter speeds.
This is convenient when you want to use aperture-priority AE for fill-flash portraits of
a subject.
High-speed sync function is available for EOS digital cameras since 2012 only.
1.
Press function button 4 until
is displayed.
2.
Press function button 2 corresponding to
,
will be displayed on the screen. Check if
is lit in
the view finder.
3.
Press function button 2 will disable .
