4.
FEL: FE Lock
FE (Flash Exposure) lock locks the correct flash exposure setting for any part of the
scene. Perform FE lock by operating the camera. For the operation, see the camera
and flash’s instruction manual.
5.
About Master Units
You can use two or more master units (master units + slave units = maximum of 16
units). By preparing multiple cameras with master units attached, you can shoot by
changing cameras while keeping the same lighting (slave units).
Note that when using two or more master units, the color of the <LINK> lamp varies
depending on the order in which the power was turned on. The first master (main
master) is green and the second subsequent masters (sub masters) are orange.
ETTL: Wireless Multiple Flash Shooting with Flash Ratio
1.
Autoflash shooting with Two Slave Groups
You can divide the slave units into two firing groups A and B, and adjust the lighting
balance (flash ratio). The exposure is controlled automatically so that the total flash
output of firing group A and group B results in the standard exposure.
1.1 Set the firing group of the slave units
Operate and set the slave unit group one by one. Set one unit to <A>, and set the other
to <B>. For the slave unit settings, see the flash or receiver’s instruction manual.
1.2
Set the ratio mode: Press the master unit’s function button 4 to display
.
Press function button corresponding to
to set to <
>.
1.3
Set the flash ratio: Press function button 3 corresponding to
, and again
press the function button 3 while it is corresponding to
, turn<
>to set the
flash ratio and press<
>button. Press function button 4 corresponding to
to return to shooting-ready state.
