Photron FASTCAM Mini WX100, Руководство по оборудованию

Страница: 72 / 100

Chapter. 3
Functions
3.21.
Direct Trigger / Direct Start Mode
The system recording operation responding to an input trigger signal can be configured according to
varies of customer’s needs.
•
DIRECT TRIGGER Mode (This mode is NOT supported on PFV software)
START TRIGGER Mode
Recording starts immediately upon the second trigger input.
CENTER, END, MANUAL TRIGGER Mode
Once the trigger signal is input, the camera will be shifted to endless recording state.
•
DIRECT START Mode
START TRIGGER Mode
The same operation as when the direct trigger mode is off.
CENTER, END, and MANUAL TRIGGER Modes
Once the trigger signal is input, the camera is shifted to endless recording state. In this
circumstance, either the “RECORD” button of PFV software or the INPUT Connector
under ReadyPos state.
•
Please refer to “3.8 Other Settings” of “Photron FASTCAM Viewer User’s Manual” for the details of
the setup.
•
For details of GENERL IN signal settings, refer to “3.17.1. INPUT Signal Settings”, page55.
3.22.
Fan Controll
This product has Fan Controll feature which makes it possible to stop the cooling fan temporarily.
This feature works only within a range of temperature in which the current temperature does not
adversely affect the operation of the camera. While the camera is in operation, the fan automatically
stops and starts detecting the current temperature within the camera: the fan stops as soon as the
temperature gets lower than the preset temperature, and starts when the temperature gets to the
higher limit.
•
For steps to activate Fan Controll feature, see Photron FASTCAM Viewer User’s Manua.
60