Photron FASTCAM Mini WX100, Руководство по оборудованию

Страница: 63 / 100

Setting the Slave Camera (Receives the Synchronization Signal)
Next, set the synchronization signal input for the slave camera which will receive the synchronization
signal supplied by the master camera. Synchronization signal settings are made with PFV.
1. Input a synchronization signal to the slave camera. Connect the master camera’s INPUT1
connector and the slave camera’s INPUT1 connector with a BNC cable. When a
synchronization signal is input to INPUT1 connector, SYNC IN LED (yellow) on the slave
camera’s back side lights.
2. Ensure the camera mode is “LIVE” (a live image is displayed). If the camera mode is set
others, check on “LIVE” at the control panel.
3. Select “I/O” at “Camera Option” of the control panel.
4. Ensure “INPUT1” is set “SYNC POS”.
5. Ensure “INPUT2” is set “TRIG POS”.
6. Set “ON CAM POS” at “SYNC IN”.
•
When a recording is started by pushing REC button on PFV, check on “No trigger input from PFV”
at “Configuration > Record Option > Trigger input setting to slave camera”.
•
If steps, 2 to 3 are completed when no synchronization signal is being input, the camera will not
operate normally. As detailed in the procedure, make the settings when the signal is being input.
51 FASTCAM Mini WX50/100 Hardware Manual