background image

 

SenSys Sealed Chamber Integrity Warranty

 

Photometrics Ltd. warrants the SenSys sealed chamber integrity for a period of twenty-four (24) months.

The warranty period is from the date of shipment listed on the packing slip shipped with the equipment.        
Photometrics will repair or replace the camera system if it fails to maintain the sealed chamber integrity with 
proper use within the warranty period.

Photometrics must be notified in writing of the defect within the warranty period. The affected camera system 
should be returned to Photometrics within thirty (30) days after discovery of such defect. Shipment should not 
be made without prior authorization by Photometrics.

The buyer shall prepay shipping charges to Photometrics and Photometrics shall pay shipping charges to return 
the product to the buyer for products returned to Photometrics for warranty service. The buyer shall pay all 
shipping charges, duties, and taxes for products returned to Photometrics from outside the U.S.A.

This warranty does not apply to defects resulting from improper or inadequate maintenance by the buyer,       
unauthorized modification or misuse, or improper site preparation or maintenance.

Photometrics’ liability shall not exceed the cost of repair or replacement of the defective equipment.

This warranty becomes void if the user attempts to repair or modify the product without the written consent of 
Photometrics. This warranty is voided if the user opens the camera head.

Содержание SenSys

















































Отзывы: