11
SPECIFICATIONS
PL1250 & PL1250DR
General:
Flash Power....................................................16 to 500 watt-seconds.
maximum (6 f-stops)
Flash Duration................................................1/1300 second at Full
1/640 second at 1/32
Recycling time................................................0.5 to 1.5 seconds
Power Control.................................................Full to 1/32 range.
(6 f-stops)
0.1 f-stop resolution.
Digital Display Accessory
Modeling Light Power ...................................250 Watt Quartz, ESS
Modeling Light Control .................................Full to 1/32 range.
0.1 f-stop resolution.
Line voltage regulated.
Triggering ......................................................Built in Photoslave.
Push to Test button.
Synchronization Jack.
5 volt isolated.
Main Supply .................................................105-125 VAC, 60 Hz, 10 amp.
Consumption ................................................ 0.2 amps idling,
15 amps charge.
Voltage Stabilization .....................................Plus or minus 0.05 f-stop.
Overload Protection .......................................Fuse. 3AG type,
15 Amp, SLO-BLO.
Packaging .......................................................Extruded Aluminum case.
Weight ............................................................5 pounds, 8 ounces.
Dimensions (housing only).............................4.5” x 4.5” x 6.75”
Flashtubes and Modeling Lamps:
Flashtube ....................................................Plug-in style, use only
Photogenic’s Standard C4-15
or C4-15C or C4-15F.
Modeling Lamp ..........................................250-Watt Quartz Halogen, ESS.
150-Watt Quartz Halogen, ESP.
100-Watt Quartz Halogen, ESR.
Fuse ............................................................3AG type, 15 Amp, SLO-BLO.
