Phonowind Phono W-1.0, Руководство пользователя

Страница: 7 / 46

3
WARNING:
The generator cannot work without the controller. If there’s no
controller, make the generator short-circuited. When the controller hasn’t work,
put the Wind Turbine of controller on the place of “Stop”
Improper Use
• Without the manufacturer's written permission, do not change the structure and
function of the generator.
• Do not modify the control software.
• The unqualified personnel are not allowed to do the work of the generator’s
installation and maintenance.
• Phono wind will not be responsible for the losses caused by improper use.
Mechanical Hazards
• Do not approach the blade and the tail rudder when the generator works.
• I n the process of the generator’s installation and maintenance, make sure that the
generator doesn’t work, its output lines are in short circuits and the blade will not
move.
WARNING: To avoid being hit by the falling objects, do not enter the danger area
in the process of installation and maintenance. Workers should circle the danger
area with warning marks and the red and white barriers. The danger area’s diameter
is 20m with the tower as the center.
Electrical Hazards
WARNING:
Before starting the work of any electrical component’s installation and
maintenance, the generator must enter the "Stop" status and the controller, storage
battery and the inverter are without power. The switch cabinet must have the warning
sign of no starting. Check whether the generator is with power, grounded and in the
status of short circuits or not.
1) Poo r connection and damaged electric cables must be dismantled and replaced.
2) To avoid the over load, the connections of the equipment must meet the
requirement s of Appe ndix D.
3) Make the generator stop work if there are some network faults.