Phonowind Phono W-1.0, Руководство пользователя

Страница: 34 / 46

Use of Phonowind
30
Starting: Off-gird
1) Make sure finishing installation according to above procedures and any parts of
wind driven generator in good condition.
2) Switch on controller, push up Batter on-off to ‘ON’, then the controller Display
starts to work, displaying Battery Voltage normal range should be 42-60, if not,
please check storage battery and wiring.
3) After 30 seconds, turn BRAKE right at ‘Normal’, push up Wind turbine at ‘Normal’,
wind driven generator will start to work. If now Wind speed≥2.5m/s, system will
start to generate electricity.
Notice: When wind driven generator first starts after installation, suggests run
system at wind speed ≤5m/s
Shut Down
When wind speed ≤10m/s, press BRAKE switch at ‘Brake’, then controller Display will
display voltage reduce to’ LOCK’, at that time, the wind wheel rotating speed slow
down obviously, then push down Wind turbine at ‘STOP’, wind driven generator will
stop working.
A B C
Wind Input
Inverter
+
-
Battery
+
-
Dump load
+
-
GND
Wind Turbine
STOP
Normal
Read
Brake
Brake
Normal
Battery
On
Off
〓
┻
Check turbine
status
Switch on
battery
Turn "Brake" to
Normal status
Starting Up Process
Check outside
wind speed
Press STOP
button
Shut Down Process
Turn "Brake" to
Brake status
Press STOP
button
Emergency shut Down Process
Turn "Brake" to
Brake status