Phonic WM-SYS3, Руководство пользователя

Страница: 7 / 26

7
WM-SYS3 / WM-SYS3D / WM-SYS4 / WM-SYS4D
TROUBLESHOOTING
No signal?
● Ensure both transmitter and receiver
are set to the same channel.
● Check the power lights on both re-
ceiver and transmitter. If one of them
is off, check the device’s power sup-
ply is connected correctly.
● Make sure the “wireless” volume
control on the Performer speakers is
turned up.
Weak signal?
● Try maintaining a better line-of-site
connection between the transmitter
and receiver.
● Change both transmitter and receiv-
er to a new frequency.
Poor quality signal?
● It is important to remember that no
other devices should be sending sig-
nals on the same frequency channel
that you are using.
● If another device is found on the
same frequency channel, find an -
other suitable channel.