Phonic WM-SYS3, Руководство пользователя

Страница: 6 / 26

6
WM-SYS3 / WM-SYS3D / WM-SYS4 / WM-SYS4D
Dual Channel Setup
With any active speakers, users are able
to wirelessly send stereo signals through
the WM70 transmitter and WM400(D)-L /
WM400(D)-R receivers.
1. Plug the mixer’s main stereo output
(with a line-level signal) to the left
and right inputs (both XLR and /4”
inputs can be connected to the com-
bo-jacks) of the WM70 transmitter.
2. Connect the provided DC power sup-
ply to the WM70’s and WM400(D)’s
power inputs and an appropriate AC
power source.
3. Adjust the channel on the WM70 and
both WM400(D)’s so they are identi-
cal. If you wish to send and receive a
signal successfully, this is of utmost
importance!
4. Make sure the WM70 is switched to
“stereo” mode.Turn the left and right
level controls to around the 3 o’clock
position.
5. Connect appropriate audio cables
to the WM400(D)s’ XLR outputs and
your speakers’ inputs.
6. Turn the WM70 on first, then the
WM400(D)s.
7.
Provided you have a signal going out
of your mixer, and your Speaker is
turned on, the wireless transmission
should be working.
WM70
WM400
WM400