Phonic WM-SYS3, Руководство пользователя

Страница: 12 / 26

WM-SYS3 / WM-SYS3D / WM-SYS4 / WM-SYS4D
Channel Mode
The channel number of the WM400D will be
displayed in the 4 digit display, unless adjust-
ments are being made to other feature’s prop-
erties. The channel number set should match
that of the WM60 or WM70 transmitter to allow
the wireless system to work successfully.
Delay Mode
Changing the delay allows audio engineers to
compensate for the distance between speakers
on stage and audience members at the rear of
the venue. Using the delay effect on a speaker
at the rear will ensure the audio from the stage
reaches audience members at the rear at ap-
proximately the same time as the audio from
the rear-speaker. The delay time is adjusted
in 0. millisecond increments, between 0 and
300 milliseconds (holding the up or down but-
ton down speeds up the adjustment time)
EQ Mode
The different EQ modes allow users to adjust
various frequencies of audio to enhance cer-
tain instruments, remove sibilance, feedback
and other undesirable noises, and improve the
overall fidelity of sounds. There are 30 pre -
sets to choose from (check EQ Preset page for
more information), the titles of which describe
what the effect does to your audio. The default
setting, P0, is completely flat.
Low Cut Filter
A low cut filter allows users to cut low frequen -
cy sounds, ensuring stage rumble and other
unwanted low-frequency sounds are removed
from your audio. This can also help adjust the
frequency to be more suitable for use with
tweeters. The low cut filter’s cut off frequency
is adjusted in Hz increments (0 Hz incre-
ments over kHz) between 0 Hz and kHz.
The default setting is 0 Hz.
High Cut Filter
The high cut filter allows users to remove un -
wanted high-frequency sounds, which can help
to remove high frequency hiss and feedback,
as well as make the audio signal more suitable
for use with subwoofer speakers. The high
cut filter’s cut off frequency is adjusted in 1 Hz
increments (0 Hz increments over kHz) be-
tween 0 kHz and 60 Hz. The default setting
is 0 kHz.
THE WM400D’S DIGITAL FEATURES