Phonic AM642D, Руководство пользователя

Страница: 13 / 36

9 AM642D / AM642DP / AM642D USB
English
48. Graphic Equalizer
This stereo 9 band graphic equalizer allows the user
to adjust the frequency response of a signal, with a
maximum of ±12 dB of signal boost or cut for each of
the frequencies. The AUX 1 / MAIN switch alternates
the use of the equalizer between the use of the AUX 1
bus and MAIN L/R bus signals. Pushing the on button
in activates the equalizer, which is accompanied by
an illuminated LED.
USB Player (AM642DP)
When playing back a signal, the signal will pass through
the USB In control and then is sent directly to the main
mix. Playback of WAV, WMA and MP3 with bit rates of up
to 320 kbit/s is possible.
49. Display
This display will display the track number currently being
played. It also offers play, pause indicators as well as the
current play time.
50. USB Port
Connect your USB flash drive to this input. Once a drive is
connected, the files will initiate and the first track will appear
paused on screen. Users are advised to format their USB
memory sticks with the FAT-32 file system.
48
51. Play Button
Push this button to start playback of the currently displayed
track. Starting a track after it is paused will resume the track
from the point at which it was paused.
52. Back/Next Buttons
Pushing these buttons will allow users to skip back and
forwards between tracks in sequence. When the menu
is activated, these buttons are used to scroll through on
screen options.
53. Stop/Menu Button
Push this button to stop playback. Push and hold the button
to access the USB player’s main menu.
AM642D USB
54. USB Port
This USB connector can be used to connect the AM642D
USB to any modern Windows or Mac-based computer.
Doing so will allow users to get a stereo signal both to
and from the computer. The signal received through this
interface will be sent to the 2T Return bus.
50
49
51
52 53
54
55. Compressor Control and Indicator
This controls the onboard compressor function on mono
channels. Turning this control up towards the 12 o’clock
position will adjust the threshold and ratio of the compressor
at varying degrees. Once you reach the 12 o’clock position,
the control will then adjust the compression settings along
with an onboard expander (or, in other words, a compander).
The LED that accompanies this control will light up when
the compressor is triggered.
55