Xen Advanced Option
When internal call is answered:
a. Press
button to transfer the external call.
b. Press and hold down button
for three seconds and 3 parties conference
starts.
NOTE
:
If the internal call is not answered, the external call can be retrieved by pressing
button.
Call Barring/Call Block for Specific Telephone
You may select 5 telephone numbers (or leading digits of a type of telephone numbers) to be
barred from each independent handset (BARR list may apply to different handsets if there is
more than one handset registered to the base unit).
Your phone will filter and block any outgoing calls if the dialled number sequence (leading digits)
matches with the BARR number list.
Set BARR number list:
Key Map:
enter PIN code
select BARR list
There is an area within the barring section where up to five numbers can be stored.
Enter numbers to be listed, and press
button to confirm.
You will be asked which HS (handsets) will be controlled by this BARR list. You may enter
HS (handset) number from 1 to 5 respectively. If there are five handsets registered with the
same base, and you just intend to keep three particular handsets under this BARR list, then
you may just enter those three particular handset numbers under this BARR list. Entered
handset number shows above the BARR list. When finished, press
to confirm. A long
beep will be heard as confirmation.
You will enter one BARR list at a time. You have to repeat the above procedures for other
BARR lists.
NOTE
:
To remove a BARR list, go through the same procedure and clear the BARR number with
button
.
2.
1.
2.
3.
4.
19