Xen Normal Operation
X
Make a new Call
Enter phone number to be called before or after pressing the
button. Entered number
will be dialled automatically.
To end call press
button.
Receiving a Call
Press the
button to answer call.
If you have subscribed to caller ID service with your operator, the caller’s number will be
shown on the display. If the caller’s number is stored in the phone book the matched name
will be displayed.
To end call press
button.
NOTE
:
Make sure the symbol on the handset screen is constant indicating a good radio signal. If
the symbol is flashing, it indicates either the handset is too far away from the base unit, or the
main power connection is not good.
Adjust Receiver Volume
The phone has 5 receiver volume levels. During conversation press
button, then
press 1-5 to select desired volume.
Boost Receiver Volume
During conversation press
button to enter the boosted receiver volume mode.
Press the
button to exit the boosted receiver volume mode.
At the end of a call, the phone will automatically return to normal receiver volume mode.
Mute/Privacy Button
During a conversation you can mute the microphone on Xen so that your voice cannot be
heard.
During conversation press
button and the microphone is muted.
To un-mute the microphone Press
button again and your voice will be heard by the caller.
1.
2.
1.
2.
3.
1.
1.
2.
3.
1.
2.
T
M
K
N
M
K
Q
D
K
1
2
1
2
3
1
2
3
1
2
!
Warning
!
Always make sure to set the volume
controls correctly according to your hearing
By using the telephone with a sound pressure
level that is too high, you may risk impairing
your hearing.
12