Phonic Ear FrontRow Pro, Руководство по установке

Страница: 21 / 33

18 www.gofrontrow.com
Step 4:
Install your speakers
Estimate time for this step: 30 minutes
Now that your cables are in place, you’re ready to install your speakers.
Ceiling speakers
If you’re putting in ceiling speakers, do the following:
1. Cut ceiling tiles
Locate one of your supplied ceiling tile bridges and
the ceiling tile designated to hold a ceiling speaker
Lay the bridge on the tile so that the large hole in
the bridge is approximately centered in the tile
Use the bridge as a template to trace a
circle on the ceiling tile
Using a keyhole saw, cut the traced circle out
of the tile
Repeat for your other speaker tiles
2. Replace tiles
Lay the tile bridge on the back side of the ceiling tile
and return both to position in the ceiling tile grid. Be
certain that the two short sides of the metal tile
bridge are resting on top of the T-bar rails holding
the ceiling tiles in place.
3
speaker input terminals
AT0806 distributed ceiling speaker features
front
1
speaker support tabs
back
2
speaker grill
5
470-7347-106 metal tile bridge
4
attached speaker back enclosure (back can)
5
1
2
3
4
FrontRowProInstallerGuide.qxd 6/10/05 4:01 PM Page 24