Phonic Ear FrontRow Pro, Руководство по установке

Страница: 24 / 33

21
Step 5:
Install sensors
Estimated time for this step: 10 minutes
You’re almost done. Chances are, your FrontRow Pro system can perform perfectly at this stage (and if you’d like
to try to skip this step, go ahead to Step 6). Just to make sure you get maximum voice pickup throughout the
room, it’s probably a good idea to install at least one external sensor.
Ceiling sensor
If you’re installing a ceiling sensor and have an acoustic
tile ceiling (or “drop ceiling”):
Note: Consult the ceiling sensor installation guide includ-
ed with packaging for complete installation instructions.
1. Locate the tile you marked in Step 2 for sensor placement
2. Slide and twist the ceiling sensor bracket onto the T-bar
rail until it rests on the rail or mount directly to the ceiling
tile if not using the T-bar supports
3. Attach the sensor to the cable leading to the receiver
4. Replace the ceiling tile, making sure that the sides of the
tiles prevent the sensor bracket from twisting
If you’re installing a ceiling sensor and have a sheetrock
ceiling:
1. Locate the spot you marked in Step 2 for sensor placement
2. Mount the ceiling sensor directly to the sheetrock ceiling
using the screws provided
3. Attach the sensor to the cable leading to the receiver
520-7347-103 ceiling sensor features
1
2
mounting screws
1
ceiling tile mount bracket
2
T-bar support rail
ceiling tile mount
FrontRowProInstallerGuide.qxd 6/10/05 4:01 PM Page 27