![background image](http://html1.mh-extra.com/html/phonic-ear/frontrow-pro/frontrow-pro_installers-manual_1552975019.webp)
16
www.gofrontrow.com
Tip
Connecting more than three sensors?
If you need more than three sensors because your room is very large or oddly
shaped, you can use a y-cord (300-6332-108) to attach more. Maximum sensor
combinations include: 1 ceiling sensor & 1 wall sensor or 6 wall sensors only.
3.
Connect cables to receiver
To ensure faithful reproduction of stereo auxiliary inputs, be sure to properly match the red/black and left/right speaker
wires to the proper receiver terminals.
Connect all speaker and sensor cables as shown:
4.
Install raceway
You can neatly conceal all cables running between the receiver and
the ceiling space using widely-available plastic raceway.
Cut enough raceway to extend from just behind your mounted receiv-
er to the ceiling
Using a level or tape measure to ensure straightness, attach the race-
way to the wall
Route all speaker and sensor cables in raceway and close
Tip
For an especially neat installation
Cut your raceway long enough to extend into the ceiling space by about 5 cen-
timeters. Notch the ceiling tile grid and the ceiling tile to fit your raceway. This
makes a neater installation and reduces flexing of the cable.
ceiling sensor
wall sensor
wall speaker
ceiling speaker
or
FrontRowProInstallerGuide.qxd 6/10/05 4:01 PM Page 22
Содержание FrontRow Pro
Страница 1: ...installer guide...