Installation
CONTROL UNIT HE-300
14
7982
2
(-)
1
Mark the holes and drill the four screw points in the end product.
2
Tighten the screws so that they project slightly out of your end product.
3
Put the CONTROL UNIT HE-300 onto the four screws at the four mounting points.
4
Pull the CONTROL UNIT HE-300 gently in the direction shown by the arrow.
5
Tighten the screws enough so that the CONTROL UNIT HE-300 cannot be moved.
Figure 6
Installing the CONTROL UNIT HE-300
1
3
4
2
