Information about creating your Operating Manual
CONTROL UNIT HE-300
16
7982
2
(-)
7. Information about creating your Operating Manual
The factual information contained within may be used when you are creating the end-product man-
ual. The installation instructions do not contain all information required for the safe operation of the
end product. They only describe the assembly and operation of the CONTROL UNIT HE-300 as a
partially assembled piece of machinery.
When creating the operating instructions, remember that the installation instructions are in-
tended for qualified specialists and are not for typical users of the end product.
7.1
General information
You should only connect drives, massage motors and accessories from DewertOkin to the
CONTROL UNIT HE-300. Only DewertOkin components have been verified to work when com-
bined together.
Avoiding damage caused by the floor lighting
CAUTION
Risk of accident
Do not look directly into this light and do not point the light into other people's eyes.
Delayed start-up
After plugging the power plug into the power outlet:
There is a delay after the supply voltage is applied before the device actually turns on. Wait at
least 10 seconds before initial commissioning.
Avoiding electrical risks
CAUTION
Electric shock
Make sure that all live (current-carrying) components and connections on the control unit cannot
be touched.
