Phoenix International, Inc.
8711 West Port Avenue
Milwaukee, WI 53224 USA
Phone (414) 973-3400
Fax (414) 973-3210
www.phx-international.com
Phoenix International, Inc. warrants its products against defects in material and workman-
ship. The company will, at its discretion, repair or replace any properly installed Phoenix
International manufactured product which fails under normal operating conditions within
one year from date of receipt. Contact the factory for return authorization before returning
the product to Phoenix International freight prepaid. If our inspection confirms that the
product is defective under terms of this warranty, it will be repaired/ replaced and returned
freight prepaid.
This warranty applies only to Products sold by Phoenix International, Inc. and specifical-
ly excludes installation or de-installation labor, transportation, or equipment of another
manufacturer used in conjunction with Phoenix International products. No other warranty,
expressed or implied, exists beyond this warranty declaration.
Phoenix constantly strives to improve its products and therefore reserves the right to
change design, materials, and specifications without notice.
Your dryWIRE oven has adjustable shelving to accommodate different
diameter wire packaging. Spools should be placed on the two center
rods for each shelf, so that the wire is stored in the middle of the oven.
For optimal heating of the oven’s interior, spools should be spaced
evenly throughout. Make sure to leave some space between each
spool for air circulation to remove excess moisture.
To remove a rod from the shelving bracket:
1) grasp rod and slide against one side of oven interior
2) lift the other side up to the top of the shelving bracket notch
3) roll rod forward out of notch or pull forward until clear of notch open-
ing
4) rods can be arranged in a variety of ways (see Fig. 3), order pn#
1257100 for additional shelves
Note: the tolerances on the shelving rods are tight for safety reasons.
VII.
SHELVING ADJUSTMENT & SPOOL PLACEMENT
Caution
: Packaging Materials
are Susceptible to Damage from
High Temperature - Contact Wire
Manufacturer for Temperature
Recommendations.
N5610275D-17
