Phoenix Contact FL SWITCH 2005 Скачать руководство пользователя страница 16

Страница: 16 / 98

FL SWITCH 2000

PHOENIX CONTACT

107065_en_01

2.2.5

Using the SD card

The switch is provided with a Phoenix Contact SD card, thereby enabling quick configura-

tion. The slot for the SD card is located on the back of the device.

Figure 2-8

Position of the SD card slot

Automatically reading the configuration on the SD card

To automatically read the configuration on the SD card, make sure that the card is inserted

when the switch is started. As soon as the boot process has been completed (indicated by

the LEDs on the port going out), the configuration is applied in the internal switch memory

and is active during operation. The SD card can then be removed. The configuration also

remains active when the switch is restarted, provided an SD card is not inserted in the de-

vice.

Содержание FL SWITCH 2005



































































































Результаты поиска

Содержание FL SWITCH 2005

Отзывы:

Phoenix Contact FL SWITCH 2005, Руководство пользователя, Страница: 16 / 98

Результаты поиска

Содержание FL SWITCH 2005

Отзывы: