Phoenix Contact FL SWITCH 2005 Скачать руководство пользователя страница 14

Страница: 14 / 98

FL SWITCH 2000

PHOENIX CONTACT

107065_en_01

2.2.2

Grounding



All Factoryline devices must be grounded so that any possible interference is shielded from

the data telegram and discharged to ground potential. A conductor of at least 2.5 mm² must

be used for grounding. Mount the module on a grounded DIN rail. The module is functional

grounded by snapping it onto the DIN rail.

2.2.3

Assignment of the RJ45 Ethernet connectors

2.2.4

Use of SFP slots (principle)

The SFP slots are used by SFP modules (FO fiberglass modules in SFP format). By select-

ing the SFP modules, the user can specify whether the switch has multimode or single-

mode FO ports, for example.

The SFP modules are available separately as accessories, see “Technical data and order-

ing data” on page 75.

Grounding protects people and machines against hazardous voltages. To avoid these

dangers, as far as possible, correct grounding, taking the local conditions into account, is

vital.

Please note that for operation with 1000 Mbps (Gigabit), cables with four twisted pairs

(eight wires), which meet the requirements of CAT5e as a minimum, must be used.

Please note that only devices in the 2100/2300 version support Gigabit.

Table 2-1

Pin assignment of RJ45 connectors

Pin number

10Base-T/10 Mbps

100Base-T/100 Mbps

1000Base-T/1000 Mbps

TD+ (transmit)

BI_DA+ (bidirectional)

TD- (transmit)

BI_DA- (bidirectional)

RD+ (receive)

BI_DB+ (bidirectional)

BI_DC+ (bidirectional)

BI_DC- (bidirectional)

RD- (receive)

BI_DB- (bidirectional)

BI_DD+ (bidirectional)

BI_DD- (bidirectional)

Содержание FL SWITCH 2005



































































































Результаты поиска

Содержание FL SWITCH 2005

Отзывы:

Phoenix Contact FL SWITCH 2005, Руководство пользователя, Страница: 14 / 98

Результаты поиска

Содержание FL SWITCH 2005

Отзывы: