Phoenix Contact AXC F 1152 Скачать руководство пользователя страница 49

Страница: 49 / 113

Mounting hardware

107708_en_08

PHOENIX CONTACT

49 / 112

4.6

Inserting the SD card

•

Disconnect the Axioline F station from the power supply.

The controller has an SD card holder with push/push technology.

•

On the AXC F 1152 and AXC F 2152, remove the upper marking field of the controller

(item 1 in

Figure 4-8

Removing the upper marking field of the AXC F 1152

and AXC F 2152

NOTE: Damage to the SD card after formatting

The SD card is already formatted (ext4 format) and is intended for use with

Phoenix Contact controllers of the PLCnext Control product family. If you format the

SD card, certain information on the SD card that is required for use with Phoenix Contact

devices will be lost. After formatting, you can no longer use the SD card to operate the

controller.

•

Ensure that the SD card is not formatted.

•

If you want to delete the overlay file system from the SD card:

Reset the controller to default setting type 1.

The SD card will be recognized during the initialization phase of the controller. If you insert

the SD card during operation, the SD card will not be recognized.

•

Make sure that the SD card has been inserted before switching on the controller, in

order to enable the controller to use it.

•

Insert and remove the SD card only when the controller supply voltage is

disconnected.

Refer to

Section “Diagnostic and status indicators” on page 26

for the LED blink

codes in the event of unauthorized removal of the SD card during operation.

•

Only use an SD card provided by Phoenix Contact, see

Section “Ordering data” on

page 91

The SD card is optional and not supplied as standard with the controller.

Please refer to the ordering data in

Section “Ordering data” on page 91

BF-C

BF-DSF

EXT

Содержание AXC F 1152


















































































































Результаты поиска

Содержание AXC F 1152

Отзывы:

Бренды по названию

Популярные бренды

Phoenix Contact AXC F 1152, Установка, запуск и эксплуатация

Результаты поиска

Содержание AXC F 1152

Отзывы:

Бренды по названию

Популярные бренды