Phoenix Contact 2313643, Руководство пользователя

Страница: 82 / 94

PSI-MODEM-SHDSL/ETH, TC ETH EXTENDER
82
PHOENIX CONTACT 104273_en_01
65
(FW
3.1 or
later)
Hub modus acti-
vated at least on
one device, but
not a local device
DIAG on
ERR on
You have exchanged one device or
configured the hub mode by single
transfer.
- – Transfer the project with the
desired setting for the hub
mode by automatic transfer
to the entire system (recom-
mended)
or
– Configure the affected
device by single transfer
65
(FW
3.1 or
later)
Hub mode acti-
vated for the local
device, but not on
all devices in the
system (system
transfer)
ERR on You have exchanged one device or
configured the hub mode by single
transfer.
- – Transfer the project with the
desired setting for the hub
mode by automatic transfer
to the entire system (recom-
mended)
or
– Configure the affected
device by single transfer
67
(FW
3.1 or
later)
Firmware of the
neighboring de-
vice does not sup-
port the hub
mode.
DIAG on
ERR on
You have exchanged one device or
configured the hub mode by single
transfer.
DSL_A,
DSL_B
– Deactivate hub mode
or
– Update firmware with
PSI-CONF configuration
software
Firmware and configuration soft-
ware can be downloaded free of
charge at
phoenixcontact.net/products .
Warning
86 Slight distur-
bances
– Minor disturbances from interference
or crosstalk
DSL_A,
DSL_B,
ETH
Ethernet port errors:
– Check installation of the
RJ45 connector (wire pair,
shielding)
– Check the condition of the
cable
– Check the cable length (less
than 100 m)
DSL port A or B errors
– Check whether the wire pair
is connected correctly (twist-
ed pair, star quad stranding).
– Reduce DSL data rate.
Table 7-1 Diagnostic IDs
ID Meaning LED Possible cause(s) Port Remedy