Phoenix Contact 2313643, Руководство пользователя

Страница: 68 / 94

PSI-MODEM-SHDSL/ETH, TC ETH EXTENDER
68
PHOENIX CONTACT 104273_en_01
Step 3: DSL line configura-
tion
The following is possible:
– 4-wire operation:
64 kbps ... 30 Mbps (manual setting of the data rate)
384 Mbps .... 11392 Mbps (automatic detection of data rate)
– 2-wire operation:
32 kbps ... 15.3 Mbps (manual setting of the data rate)
192 kbps ... 5.696 Mbps (automatic detection of data rate)
You can set the data rate individually for each line. If the data rate is the same for every
line, click on "Accept for all lines".
Step 4: Ethernet configura-
tion
In the case of "Automatic", the Ethernet extender automatically detects the data rate and
communication type on the Ethernet interface.
If necessary, you can set the data rate (10 or 100 Mbps) and the type of communication
(half or full duplex). You can set the configuration individually for each Ethernet extender.
If the configuration is the same for each Ethernet extender, click on "Accept for all".
Configuration >> Point-to-point wizard or line structure wizard or ring structure wizard [...]