Phoenix Contact 1020882 Скачать руководство пользователя страница 34

Страница: 34 / 52

GW PN/ASCII...

PHOENIX CONTACT

3886_en_A

Transmit retries:

This displays the number of retries that occurred when transmitting

PROFINET IO frames.

Transmit errors:

This displays the number of errors that occurred when transmitting

PROFINET IO frames.

Transmit unexpected sequence errors:

This value is incremented when the

GW PN/ASCII... receives a transmit message with a sequence number that is not equal

to either the previous transmit sequence number or the previous transmit sequence

number plus one. It is expected that the sequence number is incremented for each

transmit message.

Transmit invalid length errors:

This displays the number of output data lengths that

were invalid.

System errors:

This displays the number of system errors detected. Examples of

system errors include:

–

the port MAC address information not available.

–

errors that occurred when accessing Ethernet interface.

–

invalid application relationship number.

–

invalid module, submodule, slot, or subslot number.

Record read errors:

This displays the number of errors occurred when reading record

data.

Channel diagnostics added:

This displays the number of channel diagnostics alarms

that have been added.

Channel diagnostics removed:

This displays the number of channel diagnostics

alarms that have been cleared.

Channel diagnostics errors:

This displays the number of errors that occurred when

adding and removing channel diagnostics alarms.

“Ethernet Interface” group

Ethernet port 1 link status:

This displays the link status of Ethernet port 1.

Ethernet port 2link status:

This displays the link status of Ethernet port 2. Only

available on GW PN/ASCII 2E/…DB9 (dual Ethernet port) models.

PROFINET IO frames transmitted:

This displays the number of PROFINET IO frames

transmitted.

PROFINET IO frames received:

This displays the number of PROFINET IO frames

received.

Non PROFINET IO frames received:

The number of non PROFINET IO frames

received.

“System Resources” group

Heap memory (total / free):

This displays the memory usage (total and free memory)

of the GW PN/ASCII....

Idle count (min / current / max):

This displays the minimum, current, and maximum

CPU idle count of the GW PN/ASCII....

Idle count history (1 / 5 / 15 mins):

This displays the average CPU idle count in the

last 1, 5, and 15 minutes.

Содержание 1020882





















































Результаты поиска

Содержание 1020882

Отзывы:

Похожие инструкции для 1020882

Бренды по названию

Популярные бренды

Phoenix Contact 1020882, Руководство пользователя

Результаты поиска

Содержание 1020882

Отзывы:

Похожие инструкции для 1020882

Бренды по названию

Популярные бренды