Phoenix Contact 1020882 Скачать руководство пользователя страница 32

Страница: 32 / 52

GW PN/ASCII...

PHOENIX CONTACT

3886_en_A

Overrun error count:

This displays the number of received serial packets dropped

due to overrun error incidents.

Oversize packet count:

This displays the number of received serial data packets that

were larger than the configured input module.

To PLC truncated packet count:

This displays the number of received serial packets

that were truncated before being sent to the PLC.

Packets saved as record data:

This displays the number of received serial packets

that were saved as record data when the “Oversize RX Packets” option is set to

Save

Record

Error saving as record data:

This displays the number of errors that occurred when

saving serial packets as record data.

PLC record read count:

This displays the number of serial packets read by the PLC

as record data.

PLC record read error count:

This displays the number of errors that occurred while

reading serial packets as record data.

To PLC packet count:

This displays the number of serial packets sent to the PLC.

To PLC dropped packet count:

This displays the number of received serial packets

intended for the PLC that were dropped. Packets are dropped in the following

circumstances:

–

STX bytes are configured, but no STX byte(s) were found.

–

ETX bytes are configured, but no ETX byte(s) were found.

–

message time-outs.

–

packet too large.

–

receive buffer queue overflows.

“Ethernet Interface” group

PLC connection status:

This displays the application relationship number of the

current PLC connection

Device TCP connection status:

This displays the information of the device TCP

connection.

TX byte count:

The number of bytes transmitted by the GW EIP/ASCII… socket port.

TX packet count:

The number of packets transmitted by the GW EIP/ASCII… socket

port.

RX byte count:

The number of bytes received by the GW EIP/ASCII… socket port.

RX packet count:

The number of packets received by the GW EIP/ASCII… socket

port.

Oversize packet count:

This displays the number of received serial data packets that

were larger than the configured input module.

To PLC truncated packet count:

This displays the number of received Ethernet

packets that truncated before being sent to the PLC.

Packets saved as record data:

This displays the number of received serial packets

that were saved as record data when the “Oversize RX Packets” option is set to

Save

Record

Error saving as record data:

This displays the number of errors that occurred when

saving serial packets as record data.

PLC record read count:

This displays the number of Ethernet packets read by the

PLC as record data.

PLC record read error count:

This displays the number of errors that occurred while

reading Ethernet packets as record data.

To PLC packet count:

This displays the number of Ethernet packets sent to the PLC.

To PLC dropped packet count:

This displays the number of Ethernet packets

intended for the PLC that were dropped. Packets are dropped in the following

circumstances:

Содержание 1020882





















































Результаты поиска

Содержание 1020882

Отзывы:

Похожие инструкции для 1020882

Бренды по названию

Популярные бренды

Phoenix Contact 1020882, Руководство пользователя

Результаты поиска

Содержание 1020882

Отзывы:

Похожие инструкции для 1020882

Бренды по названию

Популярные бренды