EN11
WelcomeEye Connect 2 / Touch / V1
1. Visit memory function
a b c
a: Photo record of a visitor.
b: Video recording of a visitor (there must be a formatted micro SD card in the monitor).
c: Deactivation of the visit memory function.
2. Video recording configuration (valid if video mode has been selected)
Choose the video recording time (10, 20 or 30 sec) during a missed call or in monitoring
mode (
note:
Function inactive without a micro SD card for the WelcomeEye Touch. Function
always active for the WelcomeEye Connect 2).
3. Photo configuration (valid if photo mode has been selected)
Choose the number of photos taken (1, 2 or 3) during a missed call or in monitoring mode.
4. Deactivating silent mode
This function turns off the monitor ringtone for a certain period (snooze, etc.). The monitor's
LEDs will continue to flash to signal a call.
a b c
a: activate (
On
) / deactivate (
Off
)
silent mode monitor
b: Time when the ringtone will be deactivated.
c: Time when the ringtone will be reactivated.
5. Answering system function (only on WelcomeEye Connect 2, valid if video mode has
been selected)
This function allows you to record a voice message which will be played if the call is not
answered. Video recording must be configured during calls to activate this function.
