Philips VR110/07, Руководство пользователя

Страница: 30 / 38

O
PTIMIZING THE MODULATOR
E
NGLISH
30
30
O Oppttiim miizziinngg tthhee m moodduullaattoorr
If the TV set and the video recorder are only connected with an
aerial cable - rather than with an additional scart cable - it may
happen that in certain reception locations the modulator
frequency of the video recorder is occupied by a TV channel.
Result: As soon as the video recorder is switched on, the
reception quality of the TV picture deteriorates. The following
steps will show you how to overcome this problem.
1 Make sure there is no cassette in the video
recorder and switch the set off
3 The video recorder will now transmit a test
image on UHF channel 35/Frequency 583MHz
4 Change the displayed modulator frequency
with the number buttons 00--99
5 Change the setting of the programme
number on your TV set allocated to video
operation until you see the adjacent test
image clearly on the screen
6 Press O OK K several times until the display
briefly shows the message " OK ".
SSw wiittcchhiinngg ooffff tthhee m moodduullaattoorr
If you have connected the video recorder to the TV set
with a scart cable, you can switch off the modulator
when there is interference with the picture or sound.
You can find out how on the following pages.
SSuupprreessssiinngg iinntteerrffeerreennccee
11
11
T TIIPP
2 Press aatt tthhee ssaam mee ttiim mee the stop button h
on the remote control and the stop/eject
button ? on the front of the video
recorder until the display shows e.g. " M583 "
FFO ORR
EEX XPPEERRTTSS
W Whhaatt iiss aa m moodduullaattoorr??
The purpose of this electronic assembly inside your
video recorder is to pass on the picture and sound
information read in from the video tape via an aerial
cable like a TV signal to the TV set. The modulator
frequency determines the frequency range in which
these signals are transmitted.
?