Philips VR110/07, Руководство пользователя

Страница: 31 / 38

E
NGLISH
S
WITCHING THE MODULATOR ON AND OFF
31
31
SSw wiittcchhiinngg tthhee m moodduullaattoorr oonn aanndd ooffff
If picture and sound interference cannot be removed by
optimizing the modulator, the integral modulator can be switched
off.Warning: this is only possible if you have connected the video
recorder to the TV set with a scart cable. It is not possible to
operate with the modulator switched off without a scart cable.
5 Press O OK K several times until the display
briefly shows the message " OK ".
W Whhaatt iiss aa m moodduullaattoorr??
The purpose of this electronic assembly inside your
video recorder is to pass on the picture and sound
information read in from the video tape via an aerial
cable like a TV signal to the TV set. The modulator
frequency determines the frequency range in which
these signals are transmitted.
T TIIPP
1 Make sure there is no cassette in the video
recorder and switch the set off
2 Press aatt tthhee ssaam mee ttiim mee the stop button h
on the remote control and the stop/eject
button ? on the front of the video
recorder until the display shows e.g. " M583 "
3 Press O OK K.The display will show " MOD+ "
(modulator on) or " MOD- " (modulator off)
4 Use PP++ and PP-- to select the setting " MOD- ",
to switch off the modulator, or " MOD+ ", to
switch the modulator back on
PPRRO OBBLLEEM M
8 8 II aam m nnoo lloonnggeerr rreecceeiivviinngg aa ppiiccttuurree ffrroom m tthhee vviiddeeoo
rreeccoorrddeerr
4 4 Check that the video recorder and TV set are
connected with a scart cable and/or that the scart
cable is correctly connected.
4 4 If you do not have a scart cable, carry out step 4 ,
to switch the modulator on again (" MOD+ ")
?
M O D - M O D +