2-1
Figure 1
DISMANTLING INSTRUCTIONS
1) Loosen 6 screws and remove the Cover Top (pos 255) by
sliding it out towards the rear before lifting up.
-
4 screws on the rear
-
1 screw each on the left & right side
2) Loosen 2 screws each to remove the Panel Left (pos 253)
and Panel Right (pos 254). The Panels are remove by
sliding it towards the rear and outwards.
-
1 screw on the side
-
1 screw on the rear
3) Take a paper clip or any stiff wire diameter of 1mm-1.5mm
and make a marking about 40mm from the tip as shown in
Figure 1.
4) Place the set in the position as shown in Figure 2 and insert
the paper clip or stiff wire into the hole on the Left side of
the Cabinet Front (pos 101).
5) With the marking just outside the hole on the Cabinet Front
(pos 101) as shown in Figure 3, you have to feel and give
a push to unlock the tray of the Universal Loader before
sliding it out.
6) With the tray of the Universal Loader opened, remove the
Cover Tray (pos 158) as shown in Figure 4.
Opening of the Universal Loader Tray manually & Dismantling of the Cover Tray
Figure 2
Figure 3
Figure 4