2-2
1) Remove 2 screws A (pos 226) as shown in Figure 5 from
the bottom of the Cabinet Front (pos 101).
2) Release the fixation of the Combi Board (pos 1101-1001)
to Bracket Combi (pos 252) by releasing the 2 catches C2
(see Figure 6) and pulling the board outwards as shown in
Figure 7.
3) Uncatch 2 catches C1 (see Figure 6) on the left & right
sides of the Cabinet Front (pos 101) and slides the Front
Panel assembly out towards the front.
4) Remove 2 screws B (pos 225) as shown in Figure 8 to
remove the Universal Loader (pos 1109).
Detaching the Front Panel assembly from the Bottom/Rear assembly
Figure 8
Figure 5
Figure 7
Figure 6
DISMANTLING INSTRUCTIONS
