Mounting SL NITRO 510 LED STROBE Luminaire with Other Luminaires
15
SL NITRO 510 LED STROBE Luminaire
Installation & User’s Manual
Sh wline
Connecting Combined Luminaires Side-to-Side
When combining units connected side-to-side, all units connect using the same pin system and any combination can
be created (refer to installation instructions and warnings contained in
"Connecting Luminaires Side-to-Side" on page
12
).
• Each SL NITRO 510 LED STROBE Luminaire and SL BAR 520 RGBW Luminaire ships with three Luminaire
Connecting Pins as indicated in
Figure 9
.
• The three side-to-side pins must be installed per luminaire.
• All three pins are used to connect luminaires together linearly. Each fixture must be mounted using its own mount-
ing hardware. The side-to-side pins are only to align the luminaires and do not provide hanging support.
•
Figure 12
shows an example of connecting luminaires side-by-side.
Figure 12: Connecting Combined Luminaires Side-to-Side Example
WARNING!
Each fixture must use an approved safety cable attached to a fixed object.
SL BAR 520 LED Luminaire
SL NITRO 510 LED STROBE Luminaire
Front View
Rear View
See Detail
Connecting Pin
Connecting Pin (x2)
SL BAR 520 LED Luminaire
SL NITRO 510 LED STROBE Luminaire
Note, all luminaires are sold separately.
