15
English
EN
•
The operational range between the
SoundSphere DesignLine speakers and a
Bluetooth enabled device is approximately
10 meters (30 feet).
1
Press
Bluetooth
on the remote control
to switch the SoundSphere DesignLine
speakers to Bluetooth mode.
»
The source indicator on the main
speaker blinks blue.
2
On the Bluetooth device, switch on
Bluetooth, search for and select
Philips PS1
to start connection (see the user manual
of the Bluetooth device on how to enable
Bluetooth).
•
When prompted for a password, enter
"0000".
3
Wait until the source indicator turns solid
blue and you hear a beep sound from the
SoundSphere DesignLine speakers.
2
Philips PS1
4
Select and play audio files or music on
your Bluetooth device.
Tip
•
During play, if there is an incoming call, music play is
paused. Play resumes when the call ends.
•
To exit Bluetooth, select another source.
Tip
•
When your switch back to Bluetooth mode, Bluetooth
connection remains active.
Note
•
The music streaming may be interrupted by obstacles
between the device and SoundSphere DesignLine
speakers, such as wall, metallic casing that covers the
device, or other devices nearby that operate in the
same frequency.
•
If you want to connect your SoundSphere DesignLine
speakers with another Bluetooth enabled device, hold
Bluetooth
for 3 seconds and then press to reset
the Bluetooth connection.
•
Philips does not guarantee 100% compatibility with all
Bluetooth devices.
Adjust volume
•
Press
+/-
(volume) to increase or decrease
volume.
•
To mute sound, press (mute).
»
The power indicator on the main
speaker blinks red slowly.
•
To restore sound, press (mute)
again or press
+/-
(volume).
