14
EN
Play audio from an external
device connected through
analog audio sockets
1
Make sure that the external device (such
as your TV) is connected to the AUX IN
sockets on the SoundSphere DesignLine
speakers (see 'Connect to TV or other
devices through analog audio cables' on
page 11).
2
Press
AUX
on the remote control of the
speakers to select the AUX source.
»
The source indicator on the main
speaker turns yellow.
3
If the external device is a TV, select the
correct source on the TV (see the user
manual of the TV for details).
4
Play audio on the external device (see the
user manual of the external device).
»
You can hear audio from the external
device through the SoundSphere
DesignLine speakers.
1
2
TV
AV
TV
HDMI
Enable/disable Dolby night mode
The Dolby night mode, also called DRC
(Dynamic Range Control), allows you to select
a quiet sound or full dynamic sound. When
the Dolby night mode is enabled, the volume
of loud sound is decreased while the volume
of soft sound (such as speech) is increased.
To enable Dolby night mode:
•
In AUX source, press ,
SURR ON
and
successively within 3 seconds.
»
Both the power and source indicator
flash twice at t he same time.
»
You can hear a quiet sound from the
speakers.
To disable Dolby night mode:
•
In AUX source, press ,
SURR ON
and
successively within 3 seconds again.
»
Both the power and source indicator
flash three times at the same time.
»
You can hear the full dynamic sound
from the speakers.
Tip
•
After the speakers are powered off and then powered
on again, the Dolby night mode is disabled automatically.
Play audio from a Bluetooth
enabled device
Connect the SoundSphere DesignLine
speakers to a Bluetooth enabled device
(such as an iPad, iPhone, iPod touch, Android
phone, or laptop), and then you can listen to
the audio files stored on the device through
your SoundSphere DesignLine speakers.
What you need
•
A Bluetooth enabled device which
supports Bluetooth profile A2DP, and with
Bluetooth version as 2.1 + EDR.
