9
English
EN
Connect
This section helps you connect your
SoundSphere DesignLine speakers
to a TV and other devices.
For information about how to set up
connections of your SoundSphere
DesignLine speakers and accessories, you
can also see the quick start guide.
Note
•
For identification and supply ratings, refer to the type
plate at the bottom of the product.
•
Before you make or change any connections, make sure
that all devices are disconnected from the power outlet.
Connect speaker cables
Note
•
For optimal sound, use the supplied speakers only.
1
Unscrew the speaker connectors.
2
Insert fully the end of a speaker cable with
red mark into the left red (+) connector.
3
Screw the left red (+) connector to secure
the cable.
4
Insert fully the end of a speaker cable
without red mark into the left black (-)
connector.
5
Screw the left black (-) connector to
secure the cable.
6
Repeat steps 2-5 to insert the speaker
cable into the right connectors on the
other speaker.
Connect to TV through HDMI (ARC)
Connect your SoundSphere DesignLine
speakers to a TV. You can listen to
audio from TV programs through your
SoundSphere DesignLine speakers. Use the
best quality connection available on your
SoundSphere DesignLine speakers and TV.
Your SoundSphere DesignLine speakers
support HDMI with Audio Return
Channel (ARC). If your TV is HDMI ARC
compliant, you can hear the TV audio
through your SoundSphere DesignLine
speakers with a single HDMI cable.
