7
6
8.
T
o
save and exit from the Learn routine, press and release
QUIT
.
9.
Press
QUIT
.
T
o
turn on your TV or VCR, or Cable Box, etc.:
Press TV or VCR, or CBL.
Press Power
.
T
o
Clear stor
ed learned commands under a Mode:
1.
Press and hold Code Search (the remote beeps).
2.
Release Code Search when you hear a second beep.
3.
Press and release
MODE
.
4.
Press and release TV
, VCR, SA
T
, etc.
5.
Press and release
LEARN
.
6.
Press and hold Code Search. Release when you hear a beep.
7.
Press
QUIT
.
T
o
Clear ALL stor
ed learned commands:
1.
Press and hold Code Search (the remote beeps).
2.
Release Code Search when you hear a second beep.
3.
Press and release
MODE
.
4.
Press and release any Mode button (TV
, VCR, SA
T
, etc.)
5.
Press and hold
LEARN
. Release when you hear a beep.
6.
Press
QUIT
.
T
o
Clear all stor
ed Learned Commands, and User Pr
ogrammed Codes,
i.e., r
eturn to factor
y defaults:
1.
Press and hold Code Search (the remote beeps).
2.
Release Code Search when you hear a second beep.
3.
Press and hold Code Search for approximately 5 seconds until the LED
blinks on then turns of
f. The screen goes blank.
The Default Reset is now complete and the remote will be in normal TV
Mode.
T
o
change the name for a button:
1.
Press and hold Code Search (the remote beeps).
2.
Release Code Search when you hear a second beep.
3.
Press and release
MODE
.
4.
Press and release TV
, VCR, SA
T
, etc.
5.
Press and release
SCREEN
.
6.
Press any of the LCD buttons repeatedly within the current Mode to select
the individual button segment display required. Press
SCREEN
to toggle
between the two screens for that Mode.
7.
T
o
save the Label selections for the current Mode screen, press the Mute
button or the Code Search button.
routine discards any changes made and returns to normal operation.
4.
Any Setup routine button entry error or code entry error causes the remote
to give an error warning (3 beeps).
T
o
pr
ogram your r
emote to contr
ol your TV or VCR, or Cable, etc.:
1.
Press and hold Code Search (the remote beeps).
2.
Release Code Search when you hear a second beep.
3.
Press and release
MODE
.
4.
Press and release TV
, VCR, etc.
5.
Press and release
CODE
.
6.
Enter 3 digit code.
7.
Press
QUIT
.
T
o
sear
ch for a code (instead of using the code library list):
1.
T
urn on the device (TV
, VCR, etc.) to be controlled.
2.
Press and hold Code Search (the remote beeps).
3.
Release Code Search when you hear a second beep.
4.
Press and release
MODE
.
5.
Press and release TV
, VCR, SA
T
, etc.
6.
Press and release
CODE
.
7.
Press the CHANNEL UP button repeatedly until the Device to be con-
trolled changes channel.
8.
Press and release MUTE, or
OK
to install the code.
9.
Press
QUIT
.
T
o
identify a code
1.
Press and hold Code Search (the remote beeps).
2.
Release Code Search when you hear a second beep.
3.
Press and release
MODE
.
4.
Press and release TV
, VCR, SA
T
, etc.
5.
Press and release
CODE
.
6.
Press and release Code Search.
7.
The display shows the code using the LCD digits. The 3 digits are shown
in sequence for 1 second each.
8.
Press
QUIT
.
T
o
learn a command:
1.
Press and hold Code Search (the remote beeps).
2.
Release Code Search when you hear a second beep.
3.
Press and release
MODE
.
4.
Press and release TV
, VCR, SA
T
, etc.
5.
Press and release
LEARN
.
6.
Press and release the LCD Remote button that you want to store a learned
button under
.
7.
Quickly point the
top
of your original remote at the
bottom
of the LCD
remote and press and hold the original remote button that you want to learn
until the LED blinks of
f once. T
o
learn another button, press and release
LEARN
repeat from Step 6.
Quic
k
Setup Guide
Quic
k Setup Guide,
cont.
PM8TSMD.p65
12/9/02, 4:53 PM
6-7