8
ENGLISH
Vertical ironing
Hot steam is emitted from the iron. Never attempt to remove creases from a garment that someone is wearing. Do not
apply steam near your or someone else’s hand.
You can use the iron in vertical position to remove wrinkles from hanging fabrics.
1
Hold the iron in vertical position, press the steam trigger and touch the garment slightly with the soleplate
(Fig. 9).
Note: for your safety, the intelligent automatic steam mode is not available for vertical ironing.
ECO setting
By using the ECO setting (reduced amount of steam), you can save energy without compromising on the ironing result.
-
Press the ECO button. The green ECO light turns on (Fig. 10).
-
To deactivate ECO setting, press then ECO button again. The green ECO light goes off.
MAX setting
For faster ironing and a higher amount of steam, you can use MAX setting.
1
Press and hold the on/off button for 2 seconds until the light turns white (Fig. 11).
2
To deactivate MAX setting, press and hold the on/off button again for 2 seconds until the white light turns blue
Auto shut-off
-
The appliances enters the standby mode if it has not been used for 10 minutes. The light in the on/ off button starts
to flash (Fig. 12).
-
To activate the appliance again, press the on/off button. The appliance starts to heat up again.
-
The appliance switches off automatically if it has not been used for another 10 minutes after it enters the standby
mode. The light in the on/off button goes off.
IMPORTANT - EASY DE-CALC
It is very important to use the EASY DE-CALC function as soon as the EASY DE-CALC light starts to flash and the
appliance beeps continuously.
The EASY DE-CALC light flashes and the appliance beeps continuously after about a month or 10 ironing sessions to
indicate that the appliance needs to be descaled. Perform the following EASY DE-CALC procedure before you continue
ironing.
To avoid the risk of burns, unplug the appliance and let it cool down for at least two hours before you perform the
EASY DE-CALC procedure.
1
Remove the plug from the wall socket (Fig. 13).
2
Place the appliance on the edge of the tabletop.
3
Hold a cup (with a capacity of at least 350ml) under the EASY DE-CALC knob and turn the knob anticlockwise
(Fig. 14).
4
Remove the EASY DE-CALC knob and let the water with scale particles flow into the cup (Fig. 15).
5
When no more water comes out of the appliance, reinsert the EASY DE-CALC knob and turn it clockwise to fasten
it (Fig. 16).
6
You can continue using your iron immediately after completing the EASY DE-CALC procedure.
