Philips Onis Vox, Руководство пользователя

Страница: 13 / 41

Using your Onis 9
Answering a call
When someone calls you, the base station and the handset ring, the
t
symbol
blinks on the handset display and the green power/line indicator light on the base
station flashes.
Press the
t
key on the handset.
The
t
symbol stops blinking on the handset. The green light on the base
station blinks regularly to indicate that a call is in progress.
You can also press
H
. The handset loudspeaker is activated and you can
take the call.
To hang up, press
t
or replace the handset on the base station.
The call duration is displayed for 4 seconds.
Redialling the last number called
Direct redial
Press the
t
key on the handset. Wait for the dial tone.
Press the
B
key on the handset.
The last number called is shown on the display and dialled automatically.
Redial with number correction
Press the
B
key on the handset.
The last number called is shown on the display. You can use the
+
key to
correct the number.
Note:
You can redial up to the last five dialled numbers by pressing the
B
key five times
successively.
Press the
t
key on the handset.
Using the handset paging
Handset paging allows you to ring all the handsets subscribed in range of the base
station.
Press
T
once.
All the registered handsets that are in-range start ringing for 20 seconds.
Note:
If you press any key again on the base station, or if a call is incoming or initiated
from a handset, all the handsets will stop ringing.
If a handset comes into range once the paging is initiated on the base station, it will
ring at the next paging indication. In the same manner, if it goes out-of-range during
the paging, it stops ringing.
1
2
1
2
1
2
1