22
English
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you
are unable to remedy a problem by following these hints, consult your dealer or Philips for
help.
Problem
Solution
No power.
No picture.
Distorted or poor picture.
Completely distorted picture or black/
white picture.
The aspect ratio of the screen cannot be
changed even though you have set the TV
shape.
No sound or distorted sound.
✔
Check if the AC power cord is properly
connected.
✔
Press STANDBY ON
B
on the DVD System.
✔
Check if the TV is switched on.
✔
Check the video connection.
✔
Set your TV to the correct Video In channel. This
channel is usually near channel 00. Or, you may
have a button on the TV remote control that
selects Auxiliary or A/V IN channel. See your TV
owner’s manual for details. Or, change channels
at the TV until you see DVD screen on the TV.
✔
Sometimes a small amount of picture distortion
may appear. This is not a malfunction.
✔
Clean the disc.
✔
TV has a colour system standard. If the disc’s or
DVD system’s colour system is different than
your TV’s colour system, the picture may be
distorted or colourless.
✔
The aspect ratio is fixed on the DVD disc.
✔
Depending on the TV, it may not be possible to
change the aspect ratio.
✔
Adjust the volume.
✔
Check that the speakers are connected
correctly.
✔
Check that the speaker system is switched on.
✔
Replace the speaker cables.
✔
The system is in pause, slow motion or fast
forward/reverse mode, press
ÉÅ
(or
ÉÅ
on
the remote) to resume normal play mode.
pg001_pg024_MCD137_93 IFU_Eng
2008.4.24, 15:06
22
