28
•
[PCM]
- The audio device does not
support multi-channel format. Audio is
downmixed to two-channel sound.
•
[Bitstream]
- Select the original audio to
experience Dolby or DTS audio (BD-
video special sound effect is disabled).
Note
Ensure that the audio format is supported
•
by the disc and the connected audio device
(amplifier/receiver).
When
•
[Bitstream]
is selected, interactive
audio like button sound is muted.
[PCM Downsampling]
Set the sampling rate for PCM audio output
from the DIGITAL OUT jack (coaxial/optical).
•
[On]
- PCM audio is down-sampled at
48kHz.
•
[Off]
- For BD or DVD recorded in
LPCM without copyright protection,
two-channel audio signals up to 96 kHz
are output as LPCM signals with no
conversion.
Network setup
1
Press .
2
Select
[Setup]
, and press
OK
.
3
Select
[Network]
, and press .
4
Select an option, then press
OK
.
5
Select a setting, then press
OK
.
To return to the previous menu,
•
press
BACK
.
To exit the menu, press
•
.
View Network Settings
Network Installation
View Wireless Settings
Video
Advanced
Audio
Network
Preference
EasyLink
4
Select an option, and press
OK
.
5
Select a setting, and press
OK
.
To return to the previous menu,
•
press
BACK
.
To exit the menu, press
•
.
[Night Mode]
Increase a soft sound level such as dialogue to
make it easier to hear at a low volume, while
simultaneously decreasing a loud sound level.
•
[Auto]
- Detect and select a best sound
level at a low volume. Applicable to tracks
with Dolby TrueHD audio only.
•
[On]
– For quiet viewing at night.
•
[Off]
– For surround sound with a full
dynamic range.
Note
Applicable only to Dolby encoded DVD-video
•
or BD-video.
[Neo 6]
A post processing by DTS to generate a
surround sound effect from 2 channel audio.
•
[Cinema]
– Enable Neo 6 post processing
to the cinema mode.
•
[Music]
- Enable Neo 6 post processing
to the music mode.
•
[Off]
– Disable Neo 6 post processing.
[HDMI Audio]
Select an HDMI audio output when you
connect this product and the TV/audio device
with an HDMI cable.
•
[Bitstream]
– If the connected HDMI
device supports the appropriate HD
audio decoder, the original audio format
on the disc is sent. Otherwise, LPCM is
sent.
•
[Auto]
– Detect and select the best
supported audio format automatically.
[Digital Audio]
Select an audio format for the sound output
from the DIGITAL OUT jack (coaxial/optical).
•
[Auto]
- Detect and select the best
supported audio format automatically.
EN
