Emissions Test
Compliance
RF Emissions
CISPR 11
Group 2
RF Emissions
CISPR 11
Class B
Harmonics
IEC 61000-3-2
N/A
for EUT
Class A for charger
Electromagnetic Environment – Guidance
The
HomeSafe/
GoSafe
devices
must emit
Electromagnetic energy in order to perform its
intended function. Nearby electronic equipment
may be affected.
The EUT
s
Battery Powered
.
The
GoSafe
7000AHB and
71
0
0MHB
power
charger
s are
suitable for use in all
establishments, including domestic, and those
directly connected to the public low-voltage
power supply network that supplies buildings
used for domestic purposes.
Flicker
IEC 61000-3-3
Table 2 -
Guidance and Manufacturer’s declaration – Immunity
The
HomeSafe/
GoSafe
devices are
intended for use in the
electromagnetic environment
specified
below. The customer or user
of the
HomeSafe/
GoSafe
should ensure
that it is used in such an
environment.
Complies
EN/IEC 60601
Test Level
Compliance
Level
Immunity Test
Electrostatic
Discharge (ESD)
EN/IE
C
61000-4-2
±2 kV for
power
supply lines
±2 kV for
power supply
lines ±1 kV for
input/output
lines
6kV
Contact
8kV Air
6kV
Contact
8kV Air
Electromagnetic
Environment – Guidance
Floors should be wood,
concrete
or ceramic tile. If floors are
synthetic the relative humidity
should be at least 30%
Electrical fast
transient/burst
EN/IEC 61000-4-4
(only for
devices with
battery charger power
supply
-700
0
MHB &
7100MHB
)
EMC Informational Tables
Table 1 -
Guidance and Manufacturer’s Declaration – Emissions
The
EUT
"
HomeSafe/GoSafe devices
are
intended for use in the electromagnetic
environment
specified below.
The
7000MHB and 7100MHB devices are
provided with battery power adapter charger.
The customer or user of the
HomeSafe/
GoSafe
should ensure
that it is used in such an environment.
Electrical power quality should be
that of a typical commercial or
hospital environment.
