Philips IS 5022 Mark II, Инструкция по эксплуатации

Страница: 27 / 42

2.2.6
Gain
During normal operation the LED bar shows the audio levels (L and
R).
The input levels
can be individually adjusted via the t w o
GAIN
pot.
meters.
The moment either of these
p o t meters
is adjusted, the LED bar
will indicate the setting of the potmeters. After
t w o
seconds without
adjustment, the display
will
revert to showing the actual input signal. In
the “Unity Gain” position the
LED
bars will n o t indicate the level.
2.3
DE-ACTIVATING
EFFECTS
This
section applies to all effects
except
the fader
(see previous
section)
and
Q.N.|.
( s e e
next
section).
If
none
of the effects are active, it is known as defeat mode. Effects can
be de-activated as
described below.
To de-activate all the effects (except
Q.N.1.):
1. Ensure no
effect
LEDs are
flashing.
2.
Press the
EFFECTS OFF
button.
All the active effects will be de-activated
(LED(s) off).
Where a number of effects are active
and
you w a n t
to de-activate only
one of
them
( n o t
O.N.1.):
1. Use the
SELECT
buttons to select the
effect you wish
to de-activate.
2. While the
LED
is flashing,
press the
EFFECTS OFF
button.
The effect will be de-activated
(LED
off).
De-activated effects can be re-activated by
pressing
the
EFFECTS OFF
button again as long as the selected
e f f e c t
is flashing. The button has a
toggle action.