14
EN
Option 3: Connect to component
video socket
COMPONENT
VIDEO OUT
Pr
Pb
Y
Note
Scart connection is required for
fi
rst time setting in
order to change the video output setting for this unit
from RGB to YUV. See chapter ‘Adjust settings’ -
[ Video Setup ]
>
[ Component Video ]
for details.
•
1
Connect the component video cables (not
supplied) from the
Y P
B
P
R
sockets on this
unit to the component video input sockets
on your TV.
If a progressive scan TV is used, you
may turn on the progressive scan mode
(see chapter ‘Turn on Progressive Scan’
for details).
Tips
The component video input socket on your TV may
be labelled as Y Pb/Cb Pr/Cr or YUV.
This type of connections provide good picture
quality.
•
•
•
Connect subwoofer
LOUDSPEAKERS
TO SUBWOOFER
1
3
4
2
5
1
Unwind the subwoofer’s interconnect
cable at
TO MAIN UNIT
.
2
Connect the white end of the interconnect
cable to the
LOUDSPEAKERS
socket on
this unit.
3
Connect the grey end of the interconnect
cable to the
TO SUBWOOFER
socket on
this unit.
4
Connect the FM antenna (supplied) to the
FM75
Ω
socket on the subwoofer (for
some models, this cable has been
connected). Extend the FM antenna and
fi
x its ends to the wall.
5
Connect the power cord when all the
required connections are complete and
you are ready to enjoy this DVD Home
Theatre unit.
