Philips HD 8930, Руководство по обслуживанию

Страница: 44 / 54

NEW ROYAL 07 DISASSEMBLY
Saeco International Group Rev. 00 / July 2011 Page / 09
05
Loosen the screws as illustrated and remove
the gear motor cover.
Loosen the screws as illustrated and remove the gear motor assembly.
The following are located inside the compartment protected by
the casing:
- Electric motor (A) with gears (B) and (C) for transmission and
timing of the brewing unit.
- Microswitch (F) detecting brewing unit home and work posi-
tions.
- Remove the large gear (B)
- Remove the gear (C) that meshes with the motor transmission
shaft
- Remove the motor (A), complete with transmission shaft (E)
When re-assembling the
gear (B), make sure that
the arrow on the gear is
in the same position as
shown in the photo.
When replacing the motor and the
transmission shaft, make sure the
guide runners (L) are in the right
position. Grease the shaft thoroughly
and evenly.
L
B
A
D
E
C
B
7.10. Flow meter
Remove the boiler support lift the flow
meter upwards and disconnect the electrical
and water circuit connections.