Philips FTL2.1E, Руководство по обслуживанию

Страница: 123 / 172

Alignments EN 123 FTL2.1E, FTL2.2E 8.
8.4 Option Settings
8.4.1 Introduction
The microprocessor communicates with a large number of I
2
C
ICs in the set. To ensure good communication and to make
digital diagnosis possible, the microprocessor has to know
which ICs to address. The presence / absence of these specific
ICs (or functions) is made known by the option codes.
Notes:
• After changing the option(s), save them with the STORE
command.
• The new option setting is only active after the TV is
switched "off" and "on" again with the Mains switch (the
EAROM is then read again).
8.4.2 Dealer Options
Table 8-5 Dealer option overview
8.4.3 SERVICE OPTIONS
Select the sub menu's to set the initialisation codes (options) of
the set via text menus.
Table 8-6 Service option overview
Menu name Subjects Options Description
Personal
Options Picture Mute Yes Picture (blue) mute active in case no picture detected
No Noise in case of no picture detected
Virgin Mode Yes TV starts up (once) with language selection menu after mains switch
"on" for the first time (virgin mode)
No TV does not starts up (once) with language selection menu after mains
switch "on" for the first time (virgin mode)
Auto Store Mode (only for EU and
AP-PAL/M sets) None Autostore mode disabled (not in installation menu)
PDC-VPS Autostore mode via ATS (PDC/VPS) enabled
TXT page Autostore mode via ACI enabled
PDC-VPS-TXT Autostore mode via ACI or ATS enabled
TXT Preference (only for EU and AP-
PAL sets) TOP Preference to TOP Teletext
FLOF Preference to FLOF Teletext
DVD door lock (only for sets with
integrated DVD) Yes To disable the DVD tray opening function
No To enable the DVD tray opening function
AmbiLight Demo (only when Ambi
Light option is “on”) Yes Activation of AmbiLight demo via local "MENU" button possible
No Activation of AmbiLight demo via local "MENU" button not possible
Menu-item Subjects Options Description
Dual Screen PIP/Dual Screen Yes / No Feature present / not present
Text/EPG Yes / No Feature present / not present
DS/PIP Tuner Yes / No Feature present / not present (only selectable if PIP/Dual Screen option
is "on")
Teletext Flash RAM Yes / No Flash RAM present / not present
NexTView type None Feature not present
Textguide only Feature present, but only as text guide
Nextview 2c3 Feature present, for countries that support NexTView
Display Screen Value "000" 42 inch PDP SDI
Value "001" 50 inch PDP SDI
Value "002" 42 inch PDP FHP
Value "003" 30 inch LCD LPL
Value "004" 37 inch LCD LPL
Value "005" 42 inch LCD LPL
Value "006" 32 inch LCD Sharp
Value "007" 42 inch PDP SDI VGA
Value "008" 37 inch PDP FHP