Philips FTL2.1E, Руководство по обслуживанию

Страница: 10 / 172

Mechanical Instructions EN 10 FTL2.1, FTL2.2E AA 4.
4.3.12 Woofer
1. Remove all mounting screws.
2. Take out the woofer unit together with its cable.
Caution: the woofer unit must remain airtight.
4.3.13 Speakers
Figure 4-11 Speaker mounting screws at the rear side
Figure 4-12 Front cover removal
Figure 4-13 Speaker mounting screws at the front side
Figure 4-14 Speaker removal
1. Remove all speakers mounting screws (1) at the rear side
of the set (one screw is located under the Side I/O).
2. Flip the set over (be aware that the front cover is loose
now), and remover the front cover (2).
3. Remove all speakers mounting screws (3) at the LCD side.
4. Take out the speaker unit (4).
4.3.14 LCD Panel
Figure 4-15 LCD panel (photo: “Top” model)
Caution: Before you start, be sure that the foam bars support
the LCD panel border, to prevent the display from falling when
its mounting screws are released.
1.
Remove the screws from the wall mounting brackets and
remove the brackets.
2. Unplug the LVDS connector (1) at the LCD panel.
3. Unplug the backlight connectors (2).
4. Remove all mounting LCD panel screws (3).
5. Lift the plastic frame together with metal frame and PWBs
from the LCD panel.
E_14620_033.eps
130504
1
E_14620_034.eps
130504
2 2
E_14620_035.eps
090704
3
E_14620_036.eps
130504
4
E_14620_037.eps
090704
3
3
3
3
2 2
1