Philips EasyKey 7000 Series, Руководство пользователя

Страница: 8 / 30

6
Installation steps
The following installation steps only apply to right-handed doors. For
left-handed doors, please read [Pre-installation instructions] carefully
and make necessary adjustments.
Mark the hole for drilling with
drilling template and drill the hole
marked, then mount the mortise
into the hole and fasten it with
four mortise anchor screws.
1 2
Install the connecting screw tubes
on the outside escutcheon, and
put the compressed spring and
square shaft accordingly into the
square shaft holes.
Pass the cable through the hole
and then insert the square shaft
of the outside escutcheon to the
rotary hole on the mortise until
the outside escutcheon is close to
the surface of the door.
3
Place the mounting plate against
the inner surface of the door and
fasten it with four M5 connecting
screws
.
4
Make sure the latch bolt stays inside
the door during installation.
Attention
Please choose the proper square shaft
and connecting screw tube to suit your
door thickness.
Attention
Escutcheon
cable
Wi-Fi
antennas
M5 connecting
screw tube
M6 connecting
screw tube
Mortise cable
Escutcheon cable
Wi-Fi antennas