Philips DTR 1000, Руководство пользователя

Страница: 7 / 152

English
3.1 Front view
1 LOW POWER button: Switch receiver ON or into low power mode.
Reset the receiver, in case of hanging up, after a 5 second
keypress.
2 TV/RADIO button: Toggle between TV and Radio mode.
3 "-" button: Channel down.
4 Three colours LED indicator: Display receiver status (see status indicator table).
5 Red LED indicator: Display receiver status (see status indicator table)
Blink at remote control command reception.
6 "+" button: Channel up.
(1) If you have put your receiver in "Standby" or "Low power" mode and red, right hand LED is blinking
this indicates that a free over-the-air upgrade of your receiver is taking place. Do not interrupt this
operation. Wait until the blinking LED stops and the left hand LED is either orange or red (signalling
either standby mode or low power mode). You can now continue with normal operation.
(2) To cancel a running timer, press button sequence: TIMER + 0.
Status indicator table
Mode Receiver Low power Standby TV mode Radio Software Timer
LED off mains mode mode mode update (1) running (2)
4 Left hand LED Off Off Orange Green Blinking Off Green or
(3 colours) Green / Orange
Orange (in standby mode)
5 Right hand Off Red Off Off Off Blinking Red
LED (Red) red (blinking if
pressing a button)
PRODUCT DESCRIPTION 5
3 Product description
3 4 5 6
1 2