Mechanical Instructions
4.
4.3.4
Bass-midrange Speakers
Refer to next figure for details.
1.
Release the speaker connectors [1] from unit.
2.
Remove the screw [1] and lift the whole unit from the set.
Take the speakers out together with their casing. When
defective, replace the whole unit.
Figure 4-9 Bass-midrange Speaker
4.3.5
Tweeters
Refer to next figure for details.
1.
Remove the bass-midrange speaker as described earlier.
2.
Remove the screw [1] and lift the whole unit from the set.
When defective, replace the whole unit.
Figure 4-10 Tweeters
4.3.6
Display Supply Panel
Refer to next figure for details.
1.
Unplug the connectors [1].
2.
Remove the fixation screws [2].
3.
Take the board out.
Figure 4-11 Display Supply Panel
4.3.7
Small Signal Board (SSB)
Refer to next figure for details.
Caution:
it is mandatory to remount all different screws at their
original position during re-assembly. Failure to do so may result
in damaging the SSB.
Refer to next figures or details.
1.
Unplug the LVDS connector [1].
Caution:
be careful, as this is a very fragile connector!
2.
Unplug the connectors [2].
3.
Remove the screw [3] from the side I/O cover.
4.
Remove the fixation screws [4].
5.
The SSB can now be taken out of the set.
Figure 4-12 Small Signal Board
I_17660_111.ep
s
1
3
0
3
0
8
1
2
I_17660_112.ep
s
1
3
0
3
0
8
1
I_17660_11
3
.ep
s
1
3
0
3
0
8
1
2
2
2
2
2
2
2
1
2
(
2x
)
I_17660_114.ep
s
1
3
0
3
0
8
4
4
4
4
4
4
3
1
2
2
2
(2x)
4
